Skip to content

Borrelli Ambient Display Cabinet User Manual

Ambient Display Cabinet · ADS-60 · Revision 1.0

This manual covers safe installation, day-to-day operation, cleaning and troubleshooting for the Borrelli Ambient Display Cabinet. Please read it before operating the unit.

1. Warnings and Safety

These precautions ensure safe, correct use of the display cabinet and minimise the risk of injury or damage.

Flammable refrigerant This product contains R600a flammable gas. Misuse could result in fire or serious injury. If you find a gas leak, turn off the unit and ventilate the area, then call your nearest repair agent or Borrelli.
  • Keep all ventilation vents clear while the unit is operating.
  • Do not use mechanical devices to accelerate defrosting unless recommended by the manufacturer.
  • Do not damage the refrigerant circuit.
  • The LED lights must be replaced by a qualified person — contact the customer helpline.
  • Do not use electrical appliances inside the food storage compartment.
  • Do not damage, modify or excessively bend the power cord; if damaged, a qualified technician must replace it.
  • Do not store explosive substances such as aerosol cans with flammable propellant in this appliance.
  • Dispose of the unit only at an authorised waste centre; do not expose it to a flame.
  • Disconnect the unit from power before cleaning, maintenance or replacing parts.
  • All repairs, disassembly or modification must be performed by a qualified technician.
  • Use a dedicated wall outlet; do not use flammable sprays or substances near the unit.
  • The expected noise level of the unit is 55 dB.
  • Do not insert anything (fingers, sticks, etc.) into the cold air suction outlet.
  • Never place heavy objects or items containing water on top of the unit.
  • After switching off, wait 5 minutes before restarting — restarting too soon can blow a fuse, trip the breaker or overload the compressor.
Shelf load limit Maximum shelf load is 25 kg. Do not exceed the limit or throw items onto the shelves.

2. Installation

Before use

  • Remove all packaging and leave the door open to ventilate.
  • Clean the unit before use.
  • Run the unit empty for an hour before loading stock.

Placement and clearances

  • Indoor use only; keep out of direct sunlight so contents do not spoil or fade.
  • Site the cabinet away from ovens, fryers and other heat sources.
  • Install on a flat, stable, level surface strong enough to support the cabinet when loaded.

3. Cleaning

Disconnect first Always disconnect the power cord from the wall before cleaning.

Exterior and interior

  • For dust, wipe inside and out with a dry cloth.
  • For a deeper clean, use a mild detergent and a soft cloth.
  • Clean the unit regularly.
  • Never use polishing powder, soap powder, benzine, oil or hot water — these damage the paint and plastic.

After cleaning, check the power cord for cracks or damage. If you find any, contact Borrelli.

Do not wash with water Do not splash or wash the unit with water directly — this could cause a short circuit or shock.

4. How to Use

This is an ambient display cabinet. It presents products at room temperature and does not refrigerate or heat.

Loading the cabinet

  • Arrange stock evenly across the glass shelves.
  • Do not exceed the shelf load limit or stack items above each shelf.
  • Keep the door closed to keep dust off the contents.

Shelves

  • The glass shelves can be repositioned to suit taller items.
  • Support the shelf when removing or refitting it.

Lighting

If your cabinet is fitted with a display light, use the switch on the cabinet to turn it on and off.

5. Tips and Tricks

Follow these tips to get the best performance, efficiency and lifespan from the display cabinet.

Placement

  • Keep out of direct sunlight so the contents don't spoil or fade.
  • Site it away from ovens, fryers and other heat sources.

Shelves

  • Adjust the glass shelves to suit what is on display.
  • Distribute weight evenly and do not overload a single shelf.

Cleaning

  • Wipe the glass with a soft, dry cloth; use a mild glass cleaner for marks.
  • Avoid abrasive powders that can scratch the glass.
Not refrigerated Because it is not refrigerated, use this cabinet only for shelf-stable items such as bread, pastries or packaged snacks.

6. Specifications

Specifications. Dimensions in millimetres unless stated.
Specification ADS-60
Capacity 60 L
External W×D×H 400 × 300 × 620
Shelves 3
Door 1 hinged glass
Type Ambient (non-refrigerated)
Weight 17 kg

Figures from borrelli.com.au (SKU ADS-60). This is an ambient, non-refrigerated display cabinet.

7. Before Requesting Service

Please check the following if you encounter a problem. If it continues after these checks, contact Borrelli.

Common problems and what to check first.
Problem What to check
No refrigeration Is the power supply interrupted? Is the power cord securely connected? Is a fuse blown or the breaker tripped?
Inadequate refrigeration Is the temperature setting appropriate? Is anything obstructing the air inlet or outlet? Are stored items packed too tightly? Is the door frequently opened or left ajar?
Excessive noise Are all the feet in firm contact with the floor? Is the back of the unit touching the wall? Are other objects resting on it?

8. Warranty and Enquiries

Warranty periods vary by product. For the period that applies to your model, see its product page. For the warranty terms and how to make a claim, see our Terms & Conditions. Keep your proof of purchase, as it may be required.

Contact Borrelli
Phone 03 9783 6325
Email sales@borrelli.com.au
Website www.borrelli.com.au

Other Borrelli manuals:

See all Borrelli user manuals, or browse the related range.

TRADE ACCOUNTS

Enter Your Details Below

Once submitted, we will email you promptly.

Add Order Note
Coupon Code
    ×